Front of my 3rd rig, switches for gain- and mod level, grid and cathode measurement plus fan for cooling.

Seen from above .....below the CV4055 the frequency
switch, above the crystal. To your right the 6146W and tank circuit.
To your left the audio section.

Seen from the bottom....

Capacitors, coil and 6146W. Nominal output power a perky 35-45 watts.

Audio section; at the left the BU2900/5, in the middle the low- and high pass audio filters and limiter.
Front of my 200 Watt rig for the 76 meter band.
Back of my rig; it really needs two fans.
Seen from above; a good view of transformers and tank circuit. To your left the 6BH6 (crystal oscilator), EL84 (buffer), 6L6GT (clamp) and 4 * 807 (end stage).
Seen from the bottom.....
In the end-stage 4 * 807 in parallel.. nominal output power 200 Watts!
Capacitors and coil.
The 215 Watt MOSFET amplifier build in a different box.
The 807s I was using where made in May 1944.....
Front of my first rig.
Seen from above.....
Seen from the bottom.....
Tank circuit after frequency change plus crystal, CV2179 and 6146B.
|